cemal 发表于 2020-5-6 17:24:58

[Question]How can I solve RTC problam !

hi!
The command set instructions have RTC commands for my screen. but when i use these commands i can't get time information. Why could it be? (screen "DMT80600L104_01WT")



KeveinPrince 发表于 2020-5-6 20:09:40

本帖最后由 KeveinPrince 于 2020-5-6 20:11 编辑

hello!
DMT80600L104_01WT ，thisscreen does not support RTC commands.Please refer to the following T5UIC2 platform Application guide .

cemal 发表于 2020-5-6 22:30:53

Are you sure?
the company where I bought the product is using this screen on ipl device. and the device has the date and time feature. moreover, no external RTC was used. I thought they were using the RTC feature on the screen.

KeveinPrince 发表于 2020-5-7 09:46:08

cemal 发表于 2020-5-6 22:30
Are you sure?
the company where I bought the product is using this screen on ipl device. and the dev ...

Yes,I am sure.
This screen really doesn't have RTC feature.
The ipl device you mentioned has date and timefeature,that is, the control board keeps sending instructions to the screen to refresh the time displayed on the screen.

cemal 发表于 2020-5-7 17:10:02

I understood. thank you. but there is no RTC on the control board. I wonder if RTC feature can be found at atmega128A?

KeveinPrince 发表于 2020-5-7 17:35:09

cemal 发表于 2020-5-7 17:10
I understood. thank you. but there is no RTC on the control board. I wonder if RTC feature can be fo ...

OK . I suggest you read the instructions for atmega128A.
页: [1]
查看完整版本: [Question]How can I solve RTC problam !