aras 发表于 2023-2-17 17:31:24

[Question]aiot icon move

arabama hız göstergesi yapıyorum. simgeleri nasıl hareket ettirebilirim

沃特玛贞帥斯基 发表于 2023-2-17 17:36:29

Hello! Which type of screen do you use? What functions need to be implemented? Do you need the icon translation function or the icon control to send instructions to move?

aras 发表于 2023-2-17 18:15:49

I have a 720x1600 screen.I'm making the car's speedometer. similar to this

aras 发表于 2023-2-17 19:29:15

本帖最后由 aras 于 2023-2-17 19:32 编辑

沃特玛贞帥斯基 发表于 2023-2-17 17:36
Hello! Which type of screen do you use? What functions need to be implemented? Do you need the icon...
i will communicate the screen with arduino.Do I have the possibility to do it with AllToolForAIOT program

Serena 发表于 2023-2-18 08:59:18

aras 发表于 2023-2-17 19:29
i will communicate the screen with arduino.Do I have the possibility to do it with AllToolForAIOT p ...

hi, could you pls kindly advise your screen type?

aras 发表于 2023-2-18 19:57:34

Serena 发表于 2023-2-18 08:59
hi, could you pls kindly advise your screen type?

screen type AİOT TA

Serena 发表于 2023-2-18 20:30:39

本帖最后由 Serena 于 2023-2-18 21:51 编辑

aras 发表于 2023-2-18 19:57
screen type AİOT TA
if you screen is AIOT, you can use attached development tool for it and refer to attached development guide.

aras 发表于 2023-2-18 21:15:36

Serena 发表于 2023-2-18 20:30
if you screen is AIOT, you can use attached tool for it and refer to attached development guide.

AA 71 <PIC_ID> <Xs> <Ys> <Xe> <Ye> <X> <Y> CC 33 C3 3C

WHERE DO I WRITE THESE CODES?

aras 发表于 2023-2-18 21:16:59

WHERE DO I WRITE THESE CODES?

Serena 发表于 2023-2-18 21:49:47

aras 发表于 2023-2-18 21:16
WHERE DO I WRITE THESE CODES?

you can use attached SSCOM tool to send the command
页: [1] 2
查看完整版本: [Question]aiot icon move