DrAngel 发表于 2023-4-28 13:54:44

[Question]DMG80600Y080_02NR

I did not find a datasheet in the resource center.
Give me please.



In the datasheet for the previous model, I did not find the pinout of the user connector.
Also needed.


Also, please post the original user resource files.


luoyangdwin1 发表于 2023-4-28 14:44:33

Please refer to the attachment

Serena 发表于 2023-4-28 15:10:17

luoyangdwin1 发表于 2023-4-28 14:44
Please refer to the attachment

Dear, in the page 8 of above datasheet, you can find the PIN definition.
And pls kindly see the attached factory project for your reference.

DrAngel 发表于 2023-4-28 15:43:21

1. My display doesn't look like a datasheet.

DrAngel 发表于 2023-4-28 15:45:42

本帖最后由 DrAngel 于 2023-4-28 15:49 编辑


2. My display is not T5L0 as in the datasheet.
He is T5L1.

DrAngel 发表于 2023-4-28 15:48:01

3. He is not a DGUS???
Only TA???

DrAngel 发表于 2023-4-28 15:56:48

Serena 发表于 2023-4-28 15:10
Dear, in the page 8 of above datasheet, you can find the PIN definition.
And pls kindly see the at ...



Thank you very much, sorry didn't see it.

fay 发表于 2023-4-28 16:31:25

DrAngel 发表于 2023-4-28 15:48
3. He is not a DGUS???
Only TA???

This model has not been modified, since February 21 is using the T5L0 chip, you can see the PCB back of the chip screen. T5L0 does not support upgrading to DGUS mode.

DrAngel 发表于 2023-4-28 16:55:59

fay 发表于 2023-4-28 16:31
This model has not been modified, since February 21 is using the T5L0 chip, you can see the PCB ba ...

i have t5l1
attached photo above

DrAngel 发表于 2023-4-28 17:10:08

and see the photo above.
my display does not look like the one in the datasheet
页: [1] 2 3
查看完整版本: [Question]DMG80600Y080_02NR