This my foto
You can format the SD card here. The SD size is 1-16GB
Step 1: Start="Run=" Enter command (for Win7 system, enter cmd) to enter the DOS system;
Step 2: Type the command: format/q g:/fs: fat32/a: 4096 (note: q is followed by a space), and click the Enter button after completing the input.
Where g is the drive number of the SD card displayed on the user's computer, and the corresponding drive letter for different users is not fixed (such as h, i replacement)
And what about the SD card?
The questions are:
1. Why doesn't my display match the datasheet photo?
2. Why do I have t5l1, but in the datasheet t5l0.
3. can my t5l1 be flashed on a dgus?
4. give me the firmware that suits me for DGUS
Hello, this screen only supports TA's development mode
Serena 发表于 2023-4-28 15:10
Dear, in the page 8 of above datasheet, you can find the PIN definition.
And pls kindly see the at ...
I flashed the display with this firmware.
After the reboot, it first blinked, then turned black and does not react to anything.
What to do?
You can support it if the screen is t5l1 chip, and the resolution of t5l0 can't reach the ability to drive dgus, but the subsequent screen of this model is t5l0.
zzs999k 发表于 2023-4-29 19:06
You can support it if the screen is t5l1 chip, and the resolution of t5l0 can't reach the ability to ...
Clarify please.
I did not understand anything from your words.
DrAngel 发表于 2023-4-29 14:46
I flashed the display with this firmware.
After the reboot, it first blinked, then turned black an ...
What to do?
This model is a T5L0 chip, which only supports TA development and does not support DGUS. The download interface displays T5L1 because both T5L0 and T5L1 display T5L1, and there is no separate T5L0 display. Only T5L2 will show a different T5L2
DrAngel 发表于 2023-4-29 14:46
I flashed the display with this firmware.
After the reboot, it first blinked, then turned black an ...
???
Help me!