Display Cutting Icon problem

cemal · 发表于 2019-12-27 15:59:36

本帖最后由 cemal 于 2019-12-27 16:02 编辑

Hi everyone!
I am using "Display Cutting Icon" command (0x71). I want to take back what I did. for example:

At first the picture was that way.

this happened after I used the 0x71 command.

what do I need to take back the cutting process. When I press the button, I want it to be like this again. What should I do?

(screen model=dmt80600L104_01wt)

AHYEAH · 发表于 2019-12-27 17:08:53

Can also use 70 command for this problem .

Switch picture when you need back to the password page.

cemal · 发表于 2019-12-27 17:45:21

Thanks

I succeeded. Thank you very much..
I want to ask one more question;
so can we close background color when we write text to screen? is there a command for this?

dwin123456 · 发表于 2019-12-27 20:38:35

本帖最后由 dwin123456 于 2019-12-27 20:40 编辑

cemal 发表于 2019-12-27 17:45
Thanks I succeeded. Thank you very much..
I want to ask one more question;
so can we close backg ...

I suggest you could try to use the command (0X98),as shown in illustration.

		自动登录	找回密码
密码			立即注册

Display Cutting Icon problem

本帖子中包含更多资源

本帖子中包含更多资源

本帖子中包含更多资源