T5L screen high speed blender + speech recognition, DWIN Cloud application sc...

dwinForumAdmin

①、Speech recognition introduction

Fast response speed, less than 200ms;

The recognition rate is high. When the SNR is 1:1, the recognition rate is over 95%;

Data exchange is convenient with serial port;

It is convenient to develop, which only need to replace command words to realize different control functions;

Low power consumption, less than 120mA @ 5V.

②、DWIN cloud introduction

WiFi solution is to connect with mobile app through DWIN cloud platform to realize customer remote control operation. For example, in the company, you can remotely control the high speed blender through the mobile app to make various food materials.

③、Application case, for example, for making a cup of thick soymilk, you can choose one of the following three operation modes.

1. Manual operation steps:

Click the preset menu on the screen, make an appointment and click start.

2. Operation steps of speech recognition for reservation:

(1)Open

First say the wake-up word “Hello, XiaoDi”;

The equipment replied “Hello, master”, and said “soymilk on”.

(2)Close

First of all, say: “Hello, XiaoDi”;

The device answers "Hello, master", and then says "shut down". If you say this sentence during operation, it will exit the operation, and if you say standby, it will shut down.

3. Steps for DWIN cloud to make an appointment:

(1) Connect to WiFi network

(2) Download and register the DWIN cloud APP;

(3) Click "Settings" on the high speed blender screen - click "WiFi" - click "one key configuration network";

(4) Click "one key configuration network" on APP

(5) Add equipment, the APP shows that the high speed blender is online, and make an appointment at the APP side.

demonstration video：