[Question]Replacing Factory Demo on DMG80480T050_A5W

BSH

I have created a new project for this screen using DGUS V7.6488. I am using a win 11 pro platform and have generated the icl files as T5L1. The DGUS_SET files are compiled according to the picture appended. The project upload appears to run fine per the second pic, however the screen remains with the factory demo running regardless.. Could you please advise me what setting I need to change to overwrite the factory demo on this screen model and be able to change text etc via UART.  Many thanks.

DWIN-ARK

The number of downloaded files in your file download directory is 0, indicating that the file was not downloaded correctly. Please ensure that the SD card size range is 1-16GB and is formatted as FAT32 with a sector size of 4096. If you need to display text using the serial port, please refer to the development documentation linked below for the settings and command format of the text display control.  http://inforum.dwin.com.cn:20080 ... &extra=page%3D1