I think you uploaded the wrong zip file. Please upload the demo for DMG80480C043-02WTC. What you uploaded is the demo for DMG80480C043-01WTC. Thank you.
Thank you for your reply.
OK, I was able to upload the demo "DMG80480C043-01WTC.zip" to my display module, which is a DMG80480C043_02WTC. The demo seemed to work fine. However, I still would like to have a copy of the original demo that actually came with my display module, so that I can restore it. Hopefully, someone from DWIN will be kind enough to post it.
Also, I have another problem. I have a simple project which I created using DGUS Tool V7.616. However, it doesn't work on my DMG80480C043_02WTC.
The project is very simple, it uses two background images and two basic touch controls. The demo works fine if I simulate it using DGUS Tool V7.616. But it doesn't work on the display module, I don't see the background images being shown.
Only the buzzer reacts if I touch the basic touch control regions. Attached is my simple project. Hopefully someone can take a look.
T5l series base drawings need to be packed into ICL files, and the default factory configuration is 32.icl
If ICL is added to the attachment, you can test it.
|Archiver|手机版|小黑屋|迪文科技论坛
( 京ICP备05033781号-1 )
发表于 2020-5-11 10:27:25
发表于 2020-6-15 11:18:41
