[DEMO]DMG12720C050_03W T5L DGUS II project

dwinForumAdmin

The demo mainly demonstrates the main functions of the T5L_DGUSII platform,For a better demo, the description pointer and the 22. Bin file of power-on loading data are used.
For example,
(1)Turn touch sounds on or off
The variable address of 0x80 starts with a 2-word storage instruction:OFF(0x):5A 00 00 30,ON:5A 00 00 38
So,we just need store the instruction into the 22.bin file that can load data to RAM when power-on,
And then,configure the sync control,after pressing, load the data to 0x80 to close and open the touch sound.


(2)Reset
The variable address of 0x0004 starts with a 2-word storage instruction(0x):55 AA 5A A5,
So,we just need store the instruction into the 22.bin file that can load data to RAM when power-on,
And then,configure the sync control,after pressing, load the data to 0x0004 to reset.

(3)Display Rectangular progress bar
Use basic graphic control.
The instruction(0x): 0004 0002 00B7 0105 00F3 020B 001F 01D1 0200 020D 020B F800.
So,we just need store the instruction into the 22.bin file that can load data to RAM when power-on,
And then,configure the sync control,after pressing, load the data to the address of basic graphic control to display rectangle.
With the increment adjustment button, the rectangular progress bar can be displayed by continuously changing the coordinate points,
For example,changing Y coordinate 0x0105 to 0x020B,continuously pressing ,the rectangular progress bar is moving from ox0105 to 0x020B.