[Question]I have a problem downloading DMG80840C043_01 WTC

ouzzat

I have a DMG80840C043_01 WTC screen that can no longer be downloaded and I tried to download the file "T5LCFG_80480C竖屏.CFG.CFG" had no results, and I had the results in the photo as soon as I started again

DWIN_LZ

Hello, what is the size of your SD card? You need to use 1-16GB, and the SD card needs to be formatted.

ouzzat

DWIN_LZ 发表于 2023-4-24 09:56
Hello, what is the size of your SD card? You need to use 1-16GB, and the SD card needs to be formatt ...

I have a 16G SD card formatted in FTA32, in addition even with the "DwinPckits-T5L Download" does not work, it always gets stuck on the first file

Serena

ouzzat 发表于 2023-4-24 10:13
I have a 16G SD card formatted in FTA32, in addition even with the "DwinPckits-T5L Download" does  ...

Pls kindly format your SD card as below picture, then put the files into DWIN_SET folder of SD card, power off - insert SD card - power on for donwnloading.

zzs999k

I see. It seems that you are using the DwinPckits-T5L Download software to download the configuration file to your screen. According to the DWIN website, this software requires a XR21X141X driver to run properly. Have you installed this driver on your computer?

In order to improve baud rate and facilitate connection to PC debugging, Some models of DWIN adopt
TTL/RS232 compatible interface. Users can use 0Ωresistor or solder to directly short circuit. R232=0 (short
circuit) selects TTL level input; R232=1(disconnect), selects RS232 level. As shown in figure 1.0, the place is
marked by white silk screen. By default, the factory disconnects the 232 level, and selects the TTL level. That is
OFF=232, ON=TTL

DrAngel

Not this way:
"T5LCFG_80480C竖屏.CFG.CFG"
And like this:
"T5LCFG_80480C.CFG.CFG"

No Chinese characters!!! Never! Nowhere!

沃特玛贞帥斯基

The naming method is T5LCFG_ * * * CFG. * * * can be either Chinese or English.

DrAngel

Of course it can.
But does not work on localized Windows.
All my friends are like that.
And I also do not flash any of the three displays.
I remove the hieroglyphs and everything works.

wangyuxiang

The Chinese text only describes this CFG file.

You can also use English, but the beginning must be T5LCFG_