[Question]DMG80600L080_01WTR

DrAngel

Got these displays.
The documentation says that they are DGUS.
The firmware says:
T5L1 TA V1.6 2023.03.02

How can I make them DGUS?

Serena

You can download the DGUS kernal as attachment by SD card, to put the DWIN_SET to SD card, then power off - insert SD card - power on for downloading.

DrAngel

please give the firmware file for this display, to flash it through PGT05.

DrAngel

Help me!
Give file.

jufang@dwin.com

DrAngel 发表于 2023-7-3 20:27
Help me!
Give file.

Please check.

DrAngel

Is this for firmware through the programmer PGT05?

jufang@dwin.com

DrAngel 发表于 2023-7-3 21:09
Is this for firmware through the programmer PGT05?

Place in DWIN_ SET folder，Download and upgrade to DGUS using an SD card.

DrAngel

The display is not working. Black screen.
Need firmware for the programmer.

DWIN-ARK

DrAngel 发表于 2023-7-3 21:41
The display is not working. Black screen.
Need firmware for the programmer.

dear,
If you have PGT05.
(1)First, rename the kernel and burn it into PGT05.
Kernel naming：T5UIC3V10.BIN
Burn operation：Insert the card first, and then power on, do not need to press the black button, red light, indicating burning in.

Annex 1 has been renamed and can be burned to the burner.
The reason for the name change is that the burner download identification, after the download is completed, the kernel program will be stored in the burner.
This step is recommended to power off, repeat the operation, pay attention to the general download will be completed, prompt light status indication, to ensure that the burner has archived the kernel file.

(2)PGT05 program burned to screen.
PGT05 5V pins correspond to square holes. Press the black button，Press the black button and the green light flashes several times to red to indicate that burning is complete.
The screen does not need power supply. The PGT05 can be powered by USB.