[Question]Increased sensor sensitivity dmg48270с 03WTC

Kradap · 发表于 2025-7-3 11:22:37

Hello

There was a need to increase the sensitivity of the existing displays, as they had to be positioned behind glass protection.
Please tell me, is there any way to increase the sensitivity of the sensor?
I found an opportunity to influence the sensitivity of the sensor through .CFG file, but it seems that the changes I make to this file do not affect anything (I tried to change the value in the byte with the address 0x22).

jufang@dwin.com · 发表于 2025-7-3 11:54:16

屏幕背面拍个照片看下，把您的CFG文件也上传，还有您的盖板材质和厚度是多少？

Kradap · 发表于 2025-7-3 12:49:02

The material looks like ordinary glass.
Thickness: ~2.7 mm

jufang@dwin.com · 发表于 2025-7-3 13:21:06

Kradap 发表于 2025-7-3 12:49
The material looks like ordinary glass.
Thickness: ~2.7 mm

试一下附件的CFG文件。

Kradap · 发表于 2025-7-4 17:10:13

jufang@dwin.com 发表于 2025-7-3 13:21
试一下附件的CFG文件。

Thank you very much. It helped

		自动登录	找回密码
密码			立即注册

[Question]Increased sensor sensitivity dmg48270с 03WTC

本帖子中包含更多资源

本帖子中包含更多资源