【PC软件】DGUS ToolV7（T5L ASIC平台 DGUSII开发模式）

Carla熊 · 发表于 2024-9-24 08:43:52

本帖最后由 Carla熊于 2024-9-24 08:52 编辑

giorgi 发表于 2024-9-24 00:07
I have ckecked this setting in CFG and it worked!

Hello! It will be better to configure UE software for CFG accessories. The attached figure shows the CFG configuration method.If automatic data upload is checked on the control, and CFG is equipped with automatic data upload, you still can't receive the data returned by touch, so check whether the communication is normal. Whether baud rate, level and wiring are correct.

giorgi · 发表于 2024-9-26 13:02:33

Carla熊发表于 2024-9-24 08:43
Hello! It will be better to configure UE software for CFG accessories. The attached figure shows th ...

Thank Sir,
I've checked setting into CFG and now touch key return is operating as it should.
Your suggested method is more versatile, CFG over UART,
Thanks again!

giorgi · 发表于 2024-9-26 13:07:30

Over UART.....

Carla熊 · 发表于 2024-9-26 14:12:52

giorgi 发表于 2024-9-26 13:07
Over UART.....

Yes, just write 1 here and turn it on.

491612982 · 发表于 2024-10-14 15:59:56

V7.647版本的16级灰度字库工具有问题，点阵比例有问题；v7.624正常，请内部核查!

lijiayan · 发表于 2024-10-14 16:37:57

好的谢谢您的反馈

Lumenyl · 发表于 2024-10-15 11:56:17

7.647版本无法添加新的背景图

wangyuxiang · 发表于 2024-10-15 13:06:03

Lumenyl 发表于 2024-10-15 11:56
7.647版本无法添加新的背景图

你把软件关了再打开一下。可能是卡了或者BUG 了

Carla熊 · 发表于 2024-10-15 13:06:49

Lumenyl 发表于 2024-10-15 11:56
7.647版本无法添加新的背景图

可以用这个版本的

IAMRUSSIAN · 发表于 2024-10-16 21:02:41

感谢这个节目！

		自动登录	找回密码
密码			立即注册

【PC软件】DGUS ToolV7（T5L ASIC平台 DGUSII开发模式）

本帖子中包含更多资源

本帖子中包含更多资源

本帖子中包含更多资源