[Question]DMG10600T070_A5WTC The touch screen does not work

lsidl

wangyuxiang 发表于 2024-9-6 15:35
You can try flashing this CFG file to restore touch

Unfortunately, everything is still not working.

lsidl

wangyuxiang 发表于 2024-9-6 15:35
You can try flashing this CFG file to restore touch

Unfortunately, nothing is still working.

lsidl

Unfortunately, nothing is still working.

lsidl

I uploaded it to the display. It didn't help

lijiayan

烧录出厂工程，蓝屏界面发一下

lsidl

lijiayan 发表于 2024-9-6 20:41
烧录出厂工程，蓝屏界面发一下

Hi. I tried it didn't help.

ZVIP7679

If the factory engineering confirms that there is no effect after downloading it, it is necessary to consider the possibility of hardware failure.

lsidl

I connected the logic analyzer to the I2C bus of the sensor module. The touch screen cable is disconnected during the measurement.

ZVIP7679

Download this original factory file
(1) The blue screen interface can view the type and number of downloaded files to confirm that it has been downloaded.
(2) Power the screen separately, try to see if the touch has an effect under the factory file.
After the initial interface of the factory file is lit, there is a slider at the bottom, and you can enter the main interface by sliding left to the end.

lsidl

ZVIP7679 发表于 2024-9-10 11:39
Download this original factory file
(1) The blue screen interface can view the type and number of d ...

Hi. I tried it didn't help.