[DEMO]DMG10600C070_03W T5L DGUS II project

dwinForumAdmin

The demo mainly demonstrates the main functions of the T5L_DGUSII platform,For a better demo, the description pointer and the 22. Bin file of power-on loading data are used.
For example,
(1)Turn touch sounds on or off
The variable address of 0x80 starts with a 2-word storage instruction:OFF(0x):5A 00 00 30,ON:5A 00 00 38
So,we just need store the instruction into the 22.bin file that can load data to RAM when power-on,
And then,configure the sync control,after pressing, load the data to 0x80 to close and open the touch sound.

(2)Display Rectangular progress bar
Use basic graphic control.
The instruction(0x): 0004 0002 00AF 00CD 0113 00E6 F800 00AF 0154 0384 016D FF1F.
So,we just need store the instruction into the 22.bin file that can load data to RAM when power-on,
And then,configure the sync control,after pressing, load the data to the address of basic graphic control to display rectangle.
With the increment adjustment button, the rectangular progress bar can be displayed by continuously changing the coordinate points,
For example,changing X coordinate 0x0113 to 0x0300,continuously pressing ,the rectangular progress bar is moving from ox0113 to 0x0300.

Hadsame

jhpark

Do I adopt and use this sample project at my DMG10600T101_A5WTR ?
I'm tryng to find a sample project for a link, "modbus slave tutorial" : https://www.youtube.com/watch?v=aht5PoxI7Rk
But the file size of 22_Config.bin is too small to fix the point, 0x1C000...

jhpark

Do I adopt and use this sample project for my DMG10600T101_A5WTR ?
I'm trying to follow the "modbus slave tutorial" at https://www.youtube.com/watch?v=aht5PoxI7Rk,
but the file size of 22_Config.bin is too small to fix 0x1C000...

沃特玛贞帥斯基

The development of MODBUS can refer to the routine information in this link: http://inforum.dwin.com.cn:20080 ... amp;_dsign=768a43dc