[DEMO]DMG48270C043_03W T5L DGUS II project

dwinForumAdmin

The demo mainly demonstrates the main functions of the T5L_DGUSII platform,For a better demo, the description pointer and the 22. Bin file of power-on loading data are used.
For example,
(1)Turn touch sounds on or off
The variable address of 0x80 starts with a 2-word storage instruction:OFF(0x):5A 00 00 30,ON:5A 00 00 38
So,we just need store the instruction into the 22.bin file that can load data to RAM when power-on,
And then,configure the sync control,after pressing, load the data to 0x80 to close and open the touch sound.

(2)Touch any position to display coordinate values
System variable interface 0x17 is the coordinate position X coordinate pressed by the touch screen,and 0x18 is  X coordinate.
Coordinate with data variable display control can display the coordinate value of touch in real time.

(3)Display and hide Artistic variable
Hide:Firstly,Set description pointer,then write data 0xFFFF to the description pointer,
For example,write data 0xFFFF to 0x5020.
Display:Similarly,write data to the description pointer,
For example,write data 0x1032 to 0x5020.
0x1032 is the variable address of Artistic variable,0x5020 is the description pointer.