[DEMO]DMG80480C043_01W T5L DGUS II project

dwinForumAdmin

The demo mainly demonstrates the main functions of the T5L_DGUSII platform,For a better demo, the description pointer and the 22. Bin file of power-on loading data are used.
For example,
(1)Turn touch sounds on or off
The variable address of 0x0080 starts with a 2-word storage instruction:OFF(0x):5A 00 00 30,ON:5A 00 00 38,
So,we just need store the instruction into the 22.bin file that can load data to RAM when power-on,
And then,configure the sync control,after pressing, load the data to 0x0080 to close and open the touch sound.

(2)Reset
The variable address of 0x0004 starts with a 2-word storage instruction(0x):55 AA 5A A5,
So,we just need store the instruction into the 22.bin file that can load data to RAM when power-on,
And then,configure the sync control,after pressing, load the data to 0x0004 to reset.

(3)Draw circle
Use basic graphic control.
The instruction(0x): 0005 0001 00E9 011D 0040 F800
So,we just need store the instruction into the 22.bin file that can load data to RAM when power-on,
And then,configure the sync control,after pressing, load the data to the address of basic graphic control to display circle.
With the increment adjustment button,Modify the radius of the circle, the size can be adjusted.

(4)Touch any position to display coordinate values
System variable interface 0x17 is the coordinate position X coordinate pressed by the touch screen,and 0x18 is  X coordinate.
Coordinate with data variable display control can display the coordinate value of touch in real time.