[Question]Help! no response via UART port 4 when pressing the touch button

Klerik88

Hi! my problem is the following: I set up the project, activated auto-upload in the CFG file, activated data auto upload in the project, data is received in the port, I can change variables, but there is no response to the port when the sensor button is pressed!

168988

Hello, the CFG configuration of serial port 4 used here is invalid. You need to set data automatic upload in the C51 program.

Klerik88

168988 发表于 2023-1-19 21:06
Hello, the CFG configuration of serial port 4 used here is invalid. You need to set data automatic u ...

Can you tell me how to do this? I'm a beginner, I bought a display for the test. Maybe you can somehow reconfigure it to other ports? UART 2? UART 5?

zhuliuqin123

Klerik88 发表于 2023-1-19 21:11
Can you tell me how to do this? I'm a beginner, I bought a display for the test. Maybe you can som ...

Hello, what is your model? The automatic upload of serial port 2 is set in the CFG file. For the automatic upload of serial port 5, you need to download the extended OS file and set the upload in it

Klerik88

zhuliuqin123 发表于 2023-1-19 21:42
Hello, what is your model? The automatic upload of serial port 2 is set in the CFG file. For the a ...

Hello, I have an EKT040A model, I activated automatic loading in the CFG file, there is no result. Could you share a link or an extended OS file for my display? a search on the forum yielded no results

DWIN-ARK

Hello, EKT040A is initialized and lit with the C51 program. The automatic data upload requires you to edit and enable it in the C51 program. You cannot directly enable the automatic data upload through CFG. Currently, there is no C51 program that can be used directly. January 17 -January 28th is the Chinese New Year holiday, if you cannot modify the C51 program to realize automatic data upload, we can assist you with the C51 program that supports automatic data upload after January 29th

Klerik88

DWIN-ARK 发表于 2023-1-19 22:34
Hello, EKT040A is initialized and lit with the C51 program. The automatic data upload requires you t ...

Thanks. I will try to write on my own, if it doesn't work out, I hope for your help

Klerik88

DWIN-ARK 发表于 2023-1-19 22:34
Hello, EKT040A is initialized and lit with the C51 program. The automatic data upload requires you t ...

Hello! Can I count on your help in my question about sending data from the touch screen to the UART port?

DWIN-ARK

Please specify the specific requirements you want to achieve and the serial port number to use, so that we can provide the corresponding C51 program

Klerik88

DWIN-ARK 发表于 2023-2-3 19:30
Please specify the specific requirements you want to achieve and the serial port number to use, so t ...

I need it when I press the touch button on the screen so that it returns the value to UART2. Now when designing buttons in DGUS, they do not return anything to the port. all the necessary settings and checkboxes are installed.